Jumo 705010 mTRON T - Multichannel Controller Module Da User Manual download pdf

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany

Phone: +49 661 6003-0

Fax: +49 661 6003-607

E-mail: [email protected]

Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House

Temple Bank, Riverway

Harlow, Essex CM20 2DY, UK

Phone: +44 1279 635533

Fax: +44 1279 635262

E-mail: [email protected]

Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road

East Syracuse, NY 13057, USA

Phone: 315-437-5866

1-800-554-5866

Fax: 315-437-5860

E-mail: [email protected]

Internet: www.jumousa.com

Page 1/15

JUMO mTRON T

Measuring, Control, and Automation System

Multichannel controller module

Brief description

The multichannel controller module supports up to four PID controller channels (cascadable). In

the standard version, two high-quality universal analog inputs for thermocouples, RTD tempera-

ture probes, resistance transmitters, resistance/potentiometers, and standard signals are avail-

able. Two digital inputs (DC 0/24 V) and two digital outputs as a relay with N/O contact

(AC 230 V / 3 A) or as a logic output (DC 0/15 V) are also available as part of the standard ver-

sion. Due to the three option slots (option 1, 2, and 3), the module can be extended up to four

universal analog inputs, eight digital inputs, three analog outputs, or eight digital outputs.

The digitized input values/states are available in the system for further processing. The digital

and the analog outputs can be actuated by the system (via the connection list or directly by the

PLC) or directly by the module.

The module operates independently, even if the central processing unit fails or the higher-ranking

system malfunctions. This behavior can be configured.

LEDs are used to indicate applied voltage supply, the module operating status, as well as the

status of the digital inputs/outputs.

For expansion of the inputs/outputs or for service work, the module insert can be easily pulled

out of the case at the front. The case including the bus PCB remains mounted on the DIN rail.

A setup program allows the user to comfortably configure and parameterize the multichannel

controller module.

Type 705010/...

Block diagram

2 universal analog inputs

Option 1

2 digital inputs

(DC 0/24 V)

2 digital outputs:

Relay

Logic

(N/O)

(DC 0/15 V,

to control an external

solid-state relay)

705010

Option 2

Option 3

Voltage supply

System bus

Features

• Up to four PID controller channels each with

two parameter sets and four setpoint values

• Self-optimization using the oscillation or

step response method

• Independent operation

• Two universal analog inputs

• Customer-specific linearization (polynomial

up to the 4th order)

• Two digital inputs DC 0/24 V

• Two digital outputs as a relay with N/O con-

tact or a logic output

• The inputs and outputs can be extended

(option)

• All analog inputs are electrically isolated

from each other

• Limit value monitoring

• One counting input up to 10 kHz

• Automatic configuration after the module in-

sert has been exchanged

• Connection of the inputs and outputs at the

front

• Removable terminal strips with Push-In

technology

• Quick wiring of operating voltage and sys-

tem bus due to easy module connection

Approval/approval marks (see “Technical data”)

Data Sheet 705010

2013-05-07/00529107

1 2 3 4 5 6 ... 14 15